Poly Loc II
Poly Loc II is a water-soluble diverting material that can be applied in fracturing or acidizing applications to create greater stimulated formation volume. The material is soluble in water and will disperse in a matter of hours depending on the bottom hole temperature of the reservoir.
Poly Loc II will not precipitate after dissolution in water.
Features and Benefits
- Free flowing, non-caking material
- Very effective at low concentrations
- Will not precipitate after dissolution
- Material is not affected by other fracturing or acidizing materials
Applications
- Can be used in perforated or open hole fracturing or acidizing operations
- During acidizing, Poly Loc II is run at 0.2 to 0.3 kg per perforation
- During Fracturing, Poly Loc II is run at 25 or 50 kg increments
- Can be run during proppant stages
Poly Loc III
Poly Loc III is a water-soluble lost circulation material that can be applied in a variety of instances where uncontrolled fluid loss into the formation is detrimental to well operations. The material is totally soluble in water and will dissolve in a matter of hours depending on the bottom hole temperature of the reservoir.
Ploy Loc II will not precipitate after dissolution in water.
Features and Benefits
- Free flowing, non-caking material
- Very effective at low concentrations
- Will not precipitate after dissolution
- Material is not affected by other well operation additives
Applications
- Can be used in perforated or open hole operations
- When encountering lost circulation, the amount required to regain circulation can vary greatly. Suggested quantities are 10 to 20 kg increments until circulation is established.
- Can be run in water or oil-based mud systems or in cementing pre-flushes
Kaliber Chemicals has the following product(s) available:
Poly-Loc-II – Water Soluble Diverter
Poly-Loc-III – Water Soluble Lost Circulation Material